ICCS 48P CAN Interface

With up to 24 x 2 A outputs the ICCS 48P CAN Interface can cover a wide range of possibilities and is particularly suitable for mobile applications. The high number of configurable inputs and outputs also makes it the perfect module for extension to the existing CAN network. These graphically programmable controllers allow the use as a standalone solution that can be mounted on circuit boards.

Digital information and analogue voltages can be detected and processed.

Application examples

  • Control unit for central electrical distribution
  • Monitoring of fuses and switching of relays
  • Input and output extensions for CAN bus systems
  • Connection of digital and analog sensors via the CAN bus
Technical Data
General Information
Housing Tranparent
Connector 3 x Molex Mini Fit 16 Ways
Dimensions 76 x 116 x 15 mm
Weight ~ 155 g
Operating temperature -40 °C to 85 °C (no full load at 85 °C)
Storage temperature -40 °C to 85 °C
Ingress protection IP54
Operating voltage 9 to 30 V DC
Pre-fusing 10 A / Supply block
Current consumption max 40 mA
Sleep mode consumption 500 μA
Processor type Freescale HCS08
Clock frequency 40 MHz
Flash memory 60 kB (48P) / 128 kB (48P+)
RAM 4 kB (48P) / 8 kB (48P+)
EEPROM 1 kB available for graphical programming
CAN Bus Interfaces
Acc. ISO 11898-2 High speed wake on CAN
Acc. CAN 2.0 B 29 Bits extended address identifier
Acc. CAN 2.0 A 11 Bits address identifier
Baud rate 20 kBit/s to 1000 kBit/s
(250 kBits/s default value)
Inputs / Outputs
Available inputs / outputs
10 Analogue inputs 8 x 0-11.034 V DC 12 Bit
2 x 0-11.034 V DC 12 Bit / 0-20 mA
3 Digital inputs Switch on/Switch off level: 7 V / 4 V DC
1 Digital input KL 15 Wake-up Input
6 Digital outputs High side outputs max 2 A
4 PWM outputs High side outputs max 1 A / 1 kHz
14 Analogue inputs or Digital outputs 0-10 V DC 12 Bit High side outputs max 2 A
Inputs / outputs details
Analogue inputs
Input voltage max. Vsupply
Measuring range 0-11.034 V DC
Resolution 12 Bit
Input resistance 220.68 kΩ
Refresh rate max 120 ms (with cylce time 10 ms)
Digital inputs
Input voltage 0 V DC to Vsupply
Switch-on level 7 V DC
Switch-off level 4 V DC
Input resistance 22.68 kΩ
Digital outputs High side
Load current max 2 A diagnostic current sense
PWM outputs  
PWM-frequency max 1 kHz
Duty cycle 0 ... 100 %
Resolution 0.10 %
Load current max 1A

Hardware map / Pin assignment


Mating connector Part number WE eiSos
Housing: Female Dual Row Plug WR-MPC4 649 016 113 322
Crimp contact: WR-MCP4, AWG 16 (1.31 mm²) 649 005 137 22
Crimp contact: WR-MCP4, AWG 24-18 (0.2 to 0.82 mm²) 649 006 137 22
Crimp contact: WR-MCP4, AWG 28-22 (0.08 to 0.33 mm²) 649 007 137 22
For 100 pieces packages, please add "DEC" at the end of the reference.


Programming the ICCS 48P CAN Interface is carried out using ICCS SDK Plus software.

In the development phase, we support you in the creation of programs.

If you prefer to create your parameters or create programs by yourself try our software development kit ICCS SDK Plus which you can borrow for three month free of charge.